Tips for Maintaining Display Racks

We all know that everything needs to be maintained and likewise, display racks are no exception. We often clean and maintain display racks to keep them shiny. However, you may not know, some of the wrong cleaning and maintenance methods, although temporarily can make the display shelves become clean, but in fact the display shelves caused potential harm, your display shelves will appear irreparable problems, but counterproductive. The following is to tell you about the display shelf maintenance is prone to several kinds of problems and ways to avoid them, I hope to help the majority of consumers.

The rag must be clean

When cleaning and maintaining the display shelf, we must first determine whether the rag used is clean. When cleaning or wiping off the dust, be sure to turn over or change a clean rag to use again. Don’t be lazy and reuse the already soiled side again and again, this will only make the dirt repeatedly rubbing on the surface of the commercial furniture, but will damage the glossy surface of the display rack.

Care agent selection

Want to maintain the original brightness of the display shelf, there are two display shelf care spray wax and cleaning and maintenance agent display shelf maintenance products. The former is mainly for a variety of wood, polyester, paint, fireproof plastic board and other materials of the display shelf, and has two different fresh jasmine and lemon flavor. The latter is suitable for all kinds of wood, glass, synthetic wood or MEPA solid wood display racks, especially for mixed material display racks. Therefore, you can save a lot of valuable time if you use maintenance products that combine cleaning and care effects. Before using care spray wax and cleaning and maintenance agent, it is best to shake it well, and then hold the spray can at a 45-degree angle, so that the liquid ingredients inside the can can be completely released in the state without losing pressure. Afterwards, against a dry rag at a distance of about 15 centimeters gently sprayed, so then wipe commercial furniture, you can play a good cleaning and maintenance effect. In addition, remember to wash and dry the rag after use. As for display racks with fabric materials, such as fabric sofas and leisure cushions, you can use the cleaning and maintenance agent for cleaning carpets. To use, first use a vacuum cleaner to suck out the dust, and then spray a small amount of carpet cleaner on a damp cloth to wipe it.

Lacquer watermark removal

Lacquered tables with wet teacups often leave an annoying ring of watermarks, how can you get rid of them quickly? You can lay a clean damp cloth on the watermarks on the tabletop, and then use an iron on it at a lower temperature, which will make the moisture that penetrates the lacquer film evaporate, thus making the watermarks disappear. However, the use of this method, the use of the rag can not be too thin, the temperature of the iron and can not be adjusted too high. Otherwise, the watermark on the desktop is disappeared, but the branding is never removed.

Maintenance points of different materials display racks

Wooden display racks

Use special wood care oil or wax to take care of it regularly, which can increase the luster and form a protective layer.
Avoid direct contact with water, once wet immediately wipe dry.

Metal display racks

Regularly check whether the screws and other connecting parts are loose and tighten them in time.
For iron products, also need to pay attention to rust treatment; available soft cloth dipped in a small amount of rust inhibitor gently wipe.

Glass/acrylic display racks

Cleaning can use glass cleaner with a lint-free cloth to remove stains while preventing scratches.

Plastic Display Racks

Use mild detergent to clean and dry thoroughly.
Avoid high-temperature environments to prevent molding changes.

Maintenance of Corrugated Display Shelf

Keep dry

cardboard products are very afraid of water, so be sure to place the cardboard display racks away from water sources and avoid any liquid spills on them. If you are unfortunate enough to come into contact with water, use a dry cloth to absorb the moisture as soon as possible and allow it to dry naturally.

Avoid humidity

An environment with too much humidity can cause cardboard to become soft or even moldy, so it’s best to store and use cardboard display stands in a relatively dry and ventilated area. Consider using a dehumidifier to control indoor humidity during humid seasons.

Handle with care

It is important to be gentle when moving cardboard display stands to avoid bending or tearing. If the display is large and heavy, it is recommended that more than one person work together to complete the move.

Proper Cleaning

When cleaning, simply wipe gently with a soft, slightly damp cloth, do not rinse or soak with water. For stains that are difficult to remove, try using an eraser to gently wipe them away.

Dust prevention measures

Dust should be removed regularly during daily use, you can use a soft brush or hair dryer to blow away the surface dust, to prevent the accumulation of dust affecting the aesthetic.

Avoid prolonged sunlight

Strong sunlight will make the cardboard color fading, brittle texture, so try to avoid placing it under direct sunlight.

Reasonable loading

Place items according to the designed load capacity of the cardboard display stand, do not overload to avoid structural damage.

Reinforcement of support

For some of the simpler structure of the cardboard display rack, you can add additional support (such as cardboard) at the appropriate location inside to enhance the overall stability.

In short, the above is the maintenance method of the display rack, and different materials of the display rack, its maintenance method will have some different points, we need to pay special attention. Good maintenance, not only can play a role in protecting the display rack, extend its service life, but also timely detection of hidden safety hazards, improve the customer’s user experience, promote product sales.